User manual
AKKU
TEC
2412 VdS
Document
page 16 / 16
0812G01B02-160422.docx
12 Accessories
In application cases with frequent and strong temperature variations, the charging voltage should be adjusted
in order to avoid accumulator overload (danger of gassing!). In the same way, a temperature adjustment
should be ensured in particular in case of very low ambient temperatures (Tu < 15 °C) in order to ensure suffi-
cient accumulator charge.
Temperature sensor MTIAQ33G3M01
Temperature sensor MTIAQ33G3M04
Temperature sensor MTIAQ33G3M05
Every fuse output is monitored separately. If a fuse blows, the corresponding LED goes out. A blown fuse is
notified to the AkkuTEC or the PLS with collective massage.
Fuse board NBP1248G10001
Decoupling diode set including a double Schottky diode on a potential-free cooler wiht cover against direct
touch and top hat rail clamb.
KGEK002S003M45
KGEK002S003M92
For fire alarm systems, the power supply can be equipped with an additional signal generator.
Signal generator PA100
Software for PC-aided monitoring and parametrization functions
Windows .NET Framework Software
para
TEC
VdS
