J Plus, Inc
J Plus Proprietary and Confidential
45/88
7.2.3.2
RF
From the tree menu, select RF to move onto the RF Configuration page to turn the RF module on or off.
The green UN-BLOCK status (as shown in the Figure 32) indicates the RF is turned on and can be switched off
by clicking the BLOCK button. (RF will be switched ON only if the JLT622P has the S1 connection with MME.)
The red BLOCK status (as shown in Figure 33) indicates the RF is turned off but can be switched on by clicking
UN-BLOCK button. (RF can be switched OFF even though JLT622P has the S1 connection with MME.) If you
want to change Tx Power, insert the number of value and apply button click. Then Tx power will be changed.
Figure 32: RF Block
Figure 33: RF Un-block
