Bluetooth is a registered trademark of Bluetooth SIG, Inc. iPhone, iPad, and App Store are registered
trademarks of Apple, Inc. Android and Google Play Store are trademarks of Google, Inc.
IC19-118 0219 ©2019, Paymentech, LLC (“Chase”). All rights reserved.
130311
QUICK START GUIDE |
MOBILE DEVICES
| 2
4. PAIR CARD READER
continued from front
c. Pick up the new eDynamo card reader and locate the
Pushbutton on its side. Once you begin the pairing process,
you’ll have about three minutes to get your device paired
successfully, or you’ll have to start over again.
d. Press and hold the Pushbutton for two seconds. The Bluetooth
Status LED will be a steady blue, and will quickly blink three
times. Release the Pushbutton.* The eDynamo card reader is
now in pairing mode.
* If the Pushbutton is held too long (5 to 10 seconds) when establishing the
pairing session, the eDynamo will enter Airplane mode. You will need to
momentarily hold the Pushbutton again to remove it from Airplane mode.
e. On the bottom of the eDynamo card reader, look for the serial
number. It starts with S/N. Select this same serial number
from the list of devices in your Chase Mobile Checkout app. You
may need to refresh your screen to display the reader list.
f. Inside the Bluetooth Pairing Request window, enter the
default pairing code of six nines (9 9 9 9 9 9)* and tap
Pair
(for iOS) or
OK
(for Android) devices.
* If using an Android device, please disregard the suggested pairing codes
(0 0 0 0 or 1 2 3 4) your pairing window will display. You must enter
(9 9 9 9 9 9).
g. Once the status changes to Connected beneath the reader
name, toggle on the
Set As Current Device
switch. Then
tap the
Back
button.
h. In the list of readers, you’ll see a green check mark next
to the reader. The phone or tablet is now paired with the
eDynamo card reader.
5. START PROCESSING
You are now ready to process transactions using your Chase
Merchant Services account. For helpful guides and frequently
asked questions, check the Learn section in the Chase Mobile
Checkout app, or go to
merchantservices.chase.com
, select
Support & Resources and Product Support for help. If you have
questions, please call
1-866-428-4967
.
eDynamo – Connected
Bluetooth
Pairing Request
Cancel
Pair
4. PAIR CARD READER
9 9 9 9 9 9
