J+J J4C B140, Handbook, Page: 58 / 91

ASSEMBLY INSTRUCTIONS
HANDBOOK_
KIT DPS_
58
PIECES
A - 1 Cover
B
- 1 Plastic column
C - 1 DPS positioner PCB
D
- 2 Sheet metal Fixing screws
E - 1 Plastic Fixing screws
PREPARING THE COVER:
The cover of the kit is for a J4C-20, 35 and 55 models. In case you want to mount a kit on a J4C85,
follow the instructions:
A
C
D
E
B
Remove the
cap and leave
the o-ring
inside the hole
Remove the
sleeve 1 and
leave the
Oring inside.
Introduce the
sleeve in hole
A and press it
until is fully
inside (
Fig.A
)
introduce the
cap in hole B
and press it
until it is fully
inside ( Fig.B )
sleeve
O-ring
sleeve
1
A B
cap
O-ring
cap
PLEASE READ CAREFULLY BEFORE MOUNTING.
VERY IMPORTANT!!!! PLEASE FOLLOW THE INSTRUCTIONS STEP BY STEP. BEFORE CON -
NECTING “A” PLUG TO THE ACTUATOR,
CHECK THAT THE VOLTAGE IS THE SAME AS THE ONE SPECIFIED ON THE LABEL (CARTER).
TO CONVERT A STANDARD (ON-OFF) J4C ELECTRIC ACTUATOR INTO A MODULATING
FUNCTION WITH POSITIONER, PROCEED AS FOLLOWS:
INDEX