REV 4-9-12
10
Operating Instructions:
•
Choose function desired and insert payment into that coin mechanism to start function.
•
Once service is used, hang up hose.
Maintenance:
•
All servicing of machine should be conducted by an authorized service representative!
•
Filter bags should be accessed and shaken down weekly. It is recommended to keep a new set of bags on hand
so that once every few months the bags can be replaced and then laundered.
•
To maintain performance, empty dirt bin from the canister on a regular basis.
•
Periodically inspect wires and connections for wear or fatigue.
•
Check door and motor gaskets periodically for signs of wear or damage and replace as needed.
•
Check vac hose for cracks on a weekly basis.
•
Check water hoses for cracks and fatigue on a weekly basis.
•
During cold months, water must be shut off to unit and water line must be purged to prevent line breakage.
•
Clean canister with a stainless steel cleaner as needed. Decals can be cleaned with mild soap and water.
•
Check motor brushes every month for excessive wear. Motor brushes should be changed immediately if they
are shorter than ¼”.
Please disconnect power before doing this!
DISCONNECT POWER BEFORE SERVICING OR TROUBLESHOOTING!
Troubleshooting:
Problem Possible
cause
Solution
Breaker inside fuse panel is not in the on position.
Turn breaker on.
No power to machine.
Check incoming power line voltage.
Loose connection.
Check incoming power connection.
Is the incoming power at 120V?
Check voltage and monitor while machine runs.
Low voltage can cause erratic behavior.
Are any of the machines wires worn through or connections
not making contact?
Inspect wiring and connections. Look for sharp
bends in wires and places where wire is against
the metal chassis.
Unit is not powered.
Machine is behaving
erratically.
Summary of Contents for 9730
Page 5: ...REV 4 9 12 5 Product Dimensions ...
Page 12: ...REV 4 9 12 12 ...
Page 13: ...REV 4 9 12 13 ...
Page 14: ...REV 4 9 12 14 ...
