J D Williams Shelving Unit 011 9428 Series, Assembly Instructions Manual

Page: 10 / 12

Assembly Instructions
9
A Guide to wall mounting
and fixings.
Make sure that the screws and wall plugs being used are suitable for supporting your unit.
Consult a qualifed tradesperson if you are unsure.
1. General purpose wall plug
3. Cavity Fixing wall plug 4. Cavity Fixing-Heavy Duty wall plug
6. Shield Anchor wall plug - Heavy loads
2. Plasterboard wall plug
5.Hammer Fixing wall plug
Generally aerated blocks
should not be used to
support heavy loads,
this case. For light loads,
general purpose wall
plugs can be used.
For use with
plasterboard
partitions
or hollow wooden
doors.
For use when
heavy loads such
as shelving, wall
cabinets and coat
racks.
For use with
heavier loads
such as TV & HiFi
speakers and
satelite dishes etc.
For use with
plasterboard
partitions
or hollow
wooden doors.
For use with walls stuck
with plasterboard. The
wall rather than the
plasterboard. Always
to the retaining wall.
Types of walls:
Important:
When drilling into walls always check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug if you are not sure.
2: Ensure you use the recommended drill bit to match the wall plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the
thickness of the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the drilled hole.If plastic wall plugs are supplied with your
product:These are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for
your wall,seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of
the installer.