Your Washington High Back Chair is now complete and ready for use.
6/9
Note: Align Back Cushion (A) with Seat Cushion (B) by GENTLY inserting back support plate into the
rear hole of the Seat Plate (D) as shown and TIGHTEN by using the knob on the rear right side
of the Seat Plate (D). Check to make sure the knob is loose before this step.
Insert Plastic Stopper (L) into the back support plate as shown.
Before using your Chair, ensure that all the Bolts are tightened fully for safety.
A
B
D
L
WARNING: Please fully tighten the bolt after
you have completed assemby
IMPORTANT NOTE: Periodically check and re-tighten screws