J.Burrows TYPHOON PRO II Assembly Instructions Manual Download Page 10

Warranty 3 years  

 

Product Warranty 

 valid for Australian customers only 

Officeworks Ltd warrants that this product will be free from defects and work as 

intended for 3  years from the date of purchase by the original customer.  

 

If the product has any defects or does not work as intended during the Warranty Period, 

Officeworks will, at its election and at its expense, repair or replace the product. 

 

This warranty does not apply: 

• to cosmetic damage;  

• to damage caused by consumables used in connection with the product (such as 

cleaning products);  

• where the product has not been used in accordance with all provided instructions;  

• to damage arising from fair wear and tear;  

• where the product has not been subject to reasonable use;  

• where the product has been intentionally or negligent ly damaged; and/or 

• if the customer has attempted to repair the product.  

To make a claim under this warranty, please return your product with your receipt or 

proof of purchase to your nearest Officeworks store or contact 1300 633 423. 

 

This warranty is provided in addition to any rights you may be entitled to under the 

Competitions & Consumer Act 2010. 

 

Our goods come with guarantees that cannot be excluded under the Australian 

Consumer Law. You are entitled to a replacement or refund for a major failure and 

compensation for any other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 

Thank you for your purchase. Please retain your receipt to validate warranty.  

If you would like to know more about our furniture products, please visit 

www.officeworks.com.au

 

10/10

Summary of Contents for TYPHOON PRO II











Reviews: