A
Note:
Align Back Cushion (A) with Seat Cushion (B) by GENTLY inserting back support plate into the
rear hole of the Seat Plate (D) as shown and TIGHTEN by using 3 x screws (I). Tighten the screws.
Align the Plastic Cover (H) with Back Cushion (A) by pushing down.
Your Professional Mesh Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws
Australia
Officeworks Superstores Pty Ltd 236-262 East Boundary Road
East Bentleigh 3165
Before using your Chair, ensure that all the Bolts are tightened fully for safety.
I
H
K
Torq
ue 5 N
m