4
5
Fit the floor protectors
provided on the end of
each leg.
Fit the MDF shelves
onto the shelf supports
after full assembly. The corners of the shelves
will fit into the corners of the leg angles.
1
2
Fit another 2 short shelf supports
at the desired height then fit the 2
long shelf supports to match the
short shelf supports.
Decide on the position
you require the bottom shelf to be.
Fit 1 short shelf support
between the 2 leg angles.
Repeat this again
making sure that the same short shelf support
is at the same height.
Now fit the 2 long shelf supports
matching the
2 short shelf supports.
Always hammer gently,
being sure the shelf
support tabs are in line with the leg angle slots.
If the tabs are out of line,
simply bend
them to line up either way to suit.
Do not use force
and damage the tabs.
When hammering the shelf supports,
do not
hit the upturned flange, always hammer the
leg surface closest to the angle.
3
For assembly as a 4 shelf unit,
use the leg joiners in each leg
angle as illustrated if you want to
space your shelves equally apart.
3/4
