22
Changing Filter
1. When the “Anti Calc” filter change indicator (14) turns on, you will need to replace
the filter (11).
2. Unplug the appliance and allow the appliance to cool down completely.
3. Remove the water tank (8) and drain the water.
4. Pull up the filter (11) which is already installed.
5. Insert the new filter into place.
6. Turn on the appliance by pressing the “Power” button (13) and press the “Anti Calc”
button (14) for 5 seconds until the indicator light goes out.
Care and Cleaning
CAUTION: Before cleaning, ensure that the steam generator iron is unplugged
and the unit has cooled down completely.
• Do not use abrasives or abrasive cleaners and wire to clean the plate.
• Keep the soleplate smooth. Avoid contact with hard, metal objects. Do not scratch or
damage the surface of the soleplate.
• Do not place the iron on any metal base as this could damage it. Place it on the heat-
resistant stand which has non-slip pads and has been designed to withstand high
temperatures.
• Wipe the upper part of the appliance with a damp cloth. Do not use abrasives or
harsh cleaners as they may damage the surface of the steam generator.
• Never immerse the appliance in water or nay other liquid. Never hold the iron or the
base unit under the tap.
• To clean the steam holes simply use a damp cloth to wipe away any build up of lint
or starch from inside the steam holes.
Storage
• Allow the ironing system to cool down completely before storing.
• It is necessary to remove water from the water tank (8) after each use or before
storage.
• Store in a place without humidity, where it is not reachable by children.
Technical Characteristics
Model:
Ironing System Ε48D OPTIMUM PLUS
Power:
2400W
Steam rate:
180gr/min
Steam ready heat time:
60-90 seconds
Water tank capacity:
1.8Lt (MAX)
Pressure:
8 BAR
Summary of Contents for Optimum Plus
Page 2: ...1 Περιεχόμενα Contents GR Σελίδες 2 13 EN Pages 14 23 ...
Page 25: ...24 ...