17
Using the Fan
CAUTION:
• Before using, make sure that all parts of the device are properly assembled and that
there are no parts that have been damaged.
• Always place the device on a flat, dry and stable surface. There is a risk of damage if it
is not installed on a flat and level surface.
1. Plug in the appliance.
2. Turn the ON/OFF button (18) at the “ON” position.
3. Select the desired speed by pressing the corresponding button.
The fan has 3 speed
options:
0 - The fan is off
1 - Low speed
2 - Medium speed
3 - High speed
4. Set the mode (oscillating or static) by pressing down the oscillation button (9) for oscillation
or by pulling it up for static.
5. Adjust the desired angle by moving the head up or down respectively.
6. Press the "0" button (22) on the control panel and turn the ON/OFF button (18) to "OFF"
position to stop the operation.
7. Disconnect from the power outlet when not in use.
Timer Setting
1. While the fan is on, turn the timer knob (18) to the desired time for the fan to operate (10-60
minutes).
2. When the time you set is complete, the fan will stop working automatically.
3. Turn the ON/OFF button (18) to “OFF” position to stop the operation.
4. Disconnect from the power outlet when not in use.
Note:
If you want to stop the timer earlier than the selected time, turn the timer button (18) to
"OFF".
Care and Cleaning
• Switch off and unplug the appliance before cleaning.
• Do not disassemble the fan to clean it.
• At regular intervals, clean the main body of the appliance with a soft cloth and dry thoroughly.
• Never use highly corrosive or abstractive cleaning agents. Never use metal brushes or sponges
for cleaning and do not immerse the appliance in water.
• To ensure that the air circulates properly on the motor, keep the air outlets at the rear of the
motor clean.
Summary of Contents for IZ-9020
Page 2: ...1 Περιεχόμενα Contents GR Σελίδες 2 10 EN Pages 11 19 ...
Page 21: ...20 ...
