16
EN
FK - 9905
Use of the Appliance
• Wash your hair and dry thoroughly.
• Comb your hair. Do not use hairspray
or other flammable chemical hair care
products.
• Use high speed and high heat setting to
produce a very fast airflow, ideal for quick
drying.
• Use low speed and heat setting for styling.
Speed selection / temperature
• The hair dryer has 3 speed / temperature
settings:
0
OFF
3 temperature settings
2 speed settings
• Press the function / speed selector to the
relevant position to choose desired speed.
Concentrator
• Your hair dryer is equipped with narrow
concentrator for fixing your hair style. You
may turn the concentrator towards the
direction that is convenient for you. You may
use the hair dryer either with or without the
the concentrator
iMpoRtAnt
: Do not touch the
concentrator on your hair while using.
Deactivate the Appliance
• Press the function/ speed selector to “0”
position to deactivate the appliance after
use.
CAUtion
: The hair dryer is equipped
with overheating protection system. In
case the hair dryer overheats then it
automatically shuts down. Reset the
function/ speed selector to “0” position
and allow the hair dryer to cool down
completely. Then turn it on again and
use it as desired.
Hanging loop
Your appliance is equipped with a hanging
loop on the back in order for you to hang the
appliance for easier storage.
Useful tips
• Dry your hair thoroughly with a towel to
remove water from it.
• Set the hair dryer, to the highest speed/
temperature and dry your hair without the
concentrator. Do not hold the hair dryer at
the same spot for long in order to avoid
overheating/ burning your hair.
• When your hair is almost dry, lower the
speed and temperature. Use a brush, to
give your hair the desired styling.
• To fix your styling, use the concentrator.
Care and Cleaning
• Always shut off the appliance, by pushing
the function/ speed selector to the “0”
position and disconnect the power cord
from the supply mains before any cleaning
or maintenance operations. To avoid the
danger of burns, allow the appliance to cool
down completely before cleaning.
• Make sure the air inlet and outlet, the
concentrator and the main body of the
appliance are clean. Protect the appliance
from dust, dirt and fluff.
