19
Operation
1. Plug the unit into a correct socket. (Please refer to the rating label at the rear of the unit for
correct voltage/frequency.)
2. Press ON.OFF button to turn on the unit. The compressor will start to work.
3. Press
humidity setting button to set the working model you need: continuous working,
humidity 40%, 50%, 60% ή 70%. The relative indicator will light on.
4. Press
speed/ventilation button to set the ventilation speed, high or low. The relative
indicator will light on.
5. Press the “TIMER” button to set the operating hour you need (1-24 hours). The display
window will show the hour(s) you set as you press the TIMER button, after releasing it for 8
seconds around, the display window will return to the room humidity.
As the set time has
been reached, the compressor will stop working automatically..
6. By pressing the “TEMP” button, the display window will show the room temperature, after
releasing the button for 8 seconds around, the display window will return to the room humidity..
7.
DRYER function is turbo ventilation to dry the moisture in the air continuously, so it could
help to dry the laundry.
8. To turn off the unit press ON/OFF button again.
9.
Pre-setting function
By pressing TIMER button but without turning on the other functions
(including ON/OFF button), you can PRE-SET the time for the machine to work. For example,
if you press the timer to “2” the unit will work automatically after 2 hours.
10. Please note, the indicator in the front plate will light on in 3 different colors to reflect the
ambient humidity level. By this, the user can understand immediately what the ambient
humidity condition is.:
Blue light – room humidity > 70%
Green light – room humidity 50~70%
Red light –room humidity < 50%
Red light flash – water full alarm
