Get Brushing
Changing the Brush Head
/
Polishing Cup Head
º
First, rinse your mouth, wet the Brush, and add
your favorite toothpaste.
º
We recommend putting the Brush Head in
your mouth before starting it up. Why? You
don’t want a mess!
º
Move the Brush Head in a circular motion
around your mouth. Be sure to cover the
outsides, the insides, and the chewing
surfaces. The bristles should just lightly touch
your teeth and gums.
º
Brush for 2 minutes. It’s easy with izzo’s built-
in timer, which pulses every 30 seconds to
remind you to switch from one quadrant to
the next. Plus, the Brush will automatically turn
off after 2 minutes.
º
To clean your Brush Head, turn the Power
Handle on, point the Brush Head downward
45°, and rinse under a faucet. To clean the
inside of the Brush Head, run water over the
hole on the back for a few seconds. After you
remove your izzo from under the water, keep
your Brush running for a few more seconds
to expel any excess water. Wipe down as
needed and sanitize in your UVC Case before
your next use (see page 10 for details).
It’s all about the TWIST!
30
sec
Note
Replacing your Brush Head and Polishing Cup Head
every 3 months is clinically proven to remove more
plaque and will give you a top-notch cleaning.
To remove your Brush or Polishing Head:
Step 1
Hold the neck of the head (not the bristles)
Step 2
Twist counterclockwise to unlock
Step 3
Pull the head off
To attach your Brush or Polishing Head:
Step 1
Place the neck of the head on the Power Handle tip
Step 2
Twist clockwise to lock
br
ushing
with izzo
neck
7
6
