Alex Espresso Machine
6
First Time Set Up - Plumbed In Mode – Continued
Whenever the pump comes on to refill the boiler the PID display will turn off to protect
the heater during the fill process.
Place whichever portafilter you intend to use into the grouphead so that it will heat up
with the machine. It is also recommended that you keep your cups on the top cup
warming tray to keep them warm. When making espresso if the portafilter or cups are
not hot then it will cool down the shot and make it taste sour.
The machine should reach temperature in approximately 15 minutes, but to make
delicious espresso with thick rich crema it is necessary to allow the machine to be
heated for 30-45 minutes with the portafilter kept in the grouphead.
Note:
During heat up a small amount of water and steam will be discharged into the drip
tray which is normal and no cause for concern.
Before Each Use
Verify the steam and hot water knobs are both closed and your brew lever is pointing
straight down.
If you are using the machine in reservoir mode make sure the reservoir is filled with cold
softened water.
Place whichever portafilter you intend to use into the group head and turn the power
switch to the on position and let the machine warm up for 30-45 minutes for optimal
performance.
