1. Attaching the dowels with metal threaded insert and steel frame to ‘x’ Section.
AND RECESSED HOLES ON THE INSIDE FOR DOWELS AND STEEL WORK. EACH “X”
SECTION HAS AN OUTSIDE AND INSIDE LEG.
IT IS IMPORTANT TO NOTE THAT THE LONG DOWELS AND LONG METAL ROD ARE FIXED
TO THE OUTSIDE LEG AND THE SHORT DOWELS AND SHORT METAL ROD ARE FIXED TO
THE INSIDE LEG.
BOTH DOWELS AT
THE BOTTOM OF STAND
HAVE SCREW INSERTS.
2. Attaching the plain dowels.
WARNING
When tightening allen key bolts,
DO NOT OVER TIGHTEN!
Bolts should be
firmly secure,
but not over compressed.
Over tightening can cause bolt
threads to tear.
Assembly
THE “X” SECTIONS HAVE PRE-DRILLED HOLES FOR THE BOLTS ON THE OUTSIDE FACE
3
Summary of Contents for Moses Bakset Stand
Page 1: ...04 November 2013 ZEQ 01 ...
Page 3: ...2 Parts checklist ...
