Currie Technologies
Technical and Customer Service
1-800-377-4532
U
V
6.
Unlock the frame hinge by opening the quick release lever,
swinging it outward, then pulling the lever upward to disengage
the locking pin
(Photos
U
and
V
).
Fold the frame in half at this
hing.
This procedure is similar to folding the handlebars.
The bike, completely folded
Installation:
Your bicycle comes with a 24 volt sealed lead acid battery. To install the battery, simply
slide it into the empty
space behind the seat
, as shown in photo
W
. You may need to release the locking pin on the left side of the
bicycle to do so, as shown in the photo.
This type of battery does not have a ‘memory’, and riding on a partial charge will not harm the battery in any way.
Recharge time for this battery is 6-8 hours to reach a full charge.
Currie Technologies
Technical and Customer Service
1-800-377-4532
W
X
Operation
To turn your bicycle on, simply toggle the battery’s ON/OFF switch to the ON position. The lights on the
throttle (Photo
X
) will illuminate, indicating the charge level of the battery.
The Via Mezza uses the Currie “Twist and Go” (TAG) system. Simply twist the
handlebar-mounted throttle towards you to power up the motor.
Battery
ON/OFF switch
Summary of Contents for VIA MEZZA
Page 10: ...Notes Notes...
