background image

2

/7

System Operation Manual - IZIP E3 Metro

12/23/13

General information

USE RESTRICTIONS

Intended 

Use

1

Condition 2

(General purpose riding)

Minimum 

rider age

16 years

Maximum 

permissible 

weight

2

130 Kg (286 lbs)

1. This bicycle is intended to be used under the guidelines of the stated condition,

 

found 

in the intended use section of your IZIP owner’s manual. Be sure to read this section of the 

owner’s manual for more information.

2. Maximum permissible weight includes the weight of the rider (plus clothing, riding gear, 

etc), the weight of the bike itself (including any added accessories), and any cargo being carried. 

TECHNICAL SPECIFICATIONS

Motor

Type

Rear hub drive

Rated power 

500W

Peak torque

40 Nm

Battery

Voltage

36V nominal

Capacity

10.4Ah

Energy

374Wh

Cycle life 

(expected)

~700

Charger

Input voltage

110-240V AC (auto-sensing)

Frequency

50/60Hz

Input current

2.5A maximum

Charging 

voltage

42V DC (36V nominal)

Charging 

current

4.0A

Full charge 

duration

 4–6 hours

Ride performance

Top assisted 

speed

32 km/h (20 mph)

Range 

(expected)

1

25-30 miles

Control type

Throttle/pedal assist. Cadence sensor, speed sensor.

1. With normal pedaling; Contingent on terrain, rider weight, riding style, and other factors.

Summary of Contents for E3 Metro








Reviews: