LIN-CAN-RS232 Gateway API (L2CAPI)
7
L2C-API Manual, Version 1.6
2.3 Overview of interfaces
The API implements the following interfaces:
•
ILIN2CAN_API_Ctrl
Serves to connect the API with the device or to disconnect the
connection and query the connection status.
•
ILIN2CAN_GeneralConfig2
Serves to query or make the basic settings of the device such as
name, LIN baud rate and startup operation.
•
ILIN2CAN_GatewayConfig2
Serves to make the settings that are required for the gateway mode.
These include the CAN baud rate and the CAN transceiver mode and
the translation table for translating LIN to CAN objects and vice versa.
•
ILIN2CAN_SlaveConfig
Defines the response to a LIN identifier.
•
ILIN2CAN_MasterConfig2
Defines the schedule table for the master operation mode.
•
ILIN2CAN_LINMsgQueue2
Serves to read out messages from the LIN message queue and query
their status.
•
ILIN2CAN_Master_Slave2
With this interface it is possible to place LIN IDs and LIN objects on
the LIN bus by PC call and to connect a wakeup signal to the BUS.
The methods of the interfaces can only be called if the device is either in
L2C_OP_MODE_SLAVE_PC or L2C_OP_MODE_MASTER_PC mode!
Summary of Contents for LIN2CAN
Page 1: ...LIN2CAN API L2CAPI MANUAL ENGLISH...
Page 4: ......