Introduction
1 Introduction
1.1 Overview
With the IXXAT PC/CAN interface iPC-I 165 you have purchased a high-quality
electronic component which has been developed and manufactured according to
the latest technological standards.
The aim of this manual is to help you familiarize yourself with your interface, also
referred to in the following as iPC-I 165. Please read this manual before begin-
ning with the installation.
1.2 Features
•
Design as ISA board
•
16 bit memory mapped access (12 Kbytes address space are required)
•
Base address configurable via DIP switch (from C000h to FE00h in 16k steps)
•
PC interrupts configurable via jumper (IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15)
•
Microcontroller Siemens SAB C165 clocked with 20 MHz
•
One ore two CAN lines with Philips SJA1000 and/or INTEL 82527 clocked with
16 MHz
•
8 Kbytes Dual-Port-RAM, 16 semaphore registers
•
512 Kbytes RAM (optional up to 2 Mbytes)
•
512 Kbytes Flash (optional up to 1 Mbytes)
•
CAN bus connector according to ISO/IS 11898 on board (optional galvanic
decoupled); alternative bus interfaces can be realized via piggy-back board
•
Optional CAN protection circuits on-board
•
Optional developer equipment with reset button, LED and DIP switch for spe-
cial functions
•
Download of INTEL HEX files into the SRAM or FLASH
•
EMC safe design of circuit board (6 layer PCB)
Copyright IXXAT Automation GmbH
iPC-I 165 - Manual, Version 2.3
5
Summary of Contents for iPC-I 165
Page 4: ......
