Connections and indicators
3.1.3 DIN rail bus and TBUS-connector
The CAN-CR200 has a DIN rail bus. With this interface the device can be con-
nected to other CAN-CR200 devices.
The signals of the DIN rail bus are described in Table 3-3.
Pin No. Sub D9
Signal
1 CAN
high
2 CAN
low
3 GND
4 -
5 -
Table 3-3 Pin allocation of the DIN rail bus
For the DIN rail bus so called TBUS plugs are necessary. This plugs were pressed in
the DIN rail. More detailed information can be read in chapter 2.1.
Pin 1
Picture 3-3 TBUS plug with DIN rail
Copyright IXXAT Automation GmbH
CAN-CR200 - Manual, V1.0
13
