RAMSES RT 2500 S Universal – User Guide
VI.5 Configuring the RT961B2S-Mk2
VI.5.1
I
NTRODUCTION
In this section, you configure the transponder with the help of the MMI software. The
configuration is achieved by the following steps:
•
Setting up the communication between the workstation and the transponder, section
•
Managing the configuration , section VI.5.3
•
Editing the configuration parameters:
The interrogation and answer frequency codes, section VI.5.4
The blanking and turn around times, section VI.5.5
The acoustic threshold, section VI.5.6
The type of link for the pressure data, section 0
•
Checking the active acoustic remote commands of your transponder, section VI.5.8
•
Setting up the Pinger mode parameters, section 0
MU – RT961SMk2 – AN - 001- A – June 2010
28
Summary of Contents for RAMSES RT 2500 S Universal
