Custom Manuals
Provided by www.ixium.co.uk
4
Power/Control And Mode
These buttons enable you to switch between the camera, video and audio recorder features
depending on what you need.
Camera Mode
Press
and hold
the Power/Control button until you can see the indicator has turned red
(this should
only take 2 or 3 seconds)
. When the watch is ready to take photos this light will turn blue. Once the
indicator has turned blue then all you need to do is point the watch in the direction you wish to take
a picture of and quickly press the mode button. The indicator will turn red whilst the picture is
taking and then turn blue again when ready to take the next one.
When you are done taking pictures press
and hold
the Power/Control button until you can see the
indicator flashing red
(this should only take 2 or 3 seconds)
. After the indicator has flashed red the
camera is now off.
Video Mode
Start off by going into the camera mode. Instead of quickly pressing the mode button, quickly double
press the Power/Control button and the blue light will flash. The indicator light will go out and might
look like the watch it not doing anything, however, it is now recording video.
You can check whether it is still recording video by quickly pressing the mode button and the
indicator light should flash blue again.
When you are done recording video press
and hold
the Power/Control button until you can see the
indicator flashing red
(this should only take 2 or 3 seconds)
. After the indicator has flashed red the
video recorder is now off.
Audio Mode
Start off by going into the camera mode. Instead of quickly pressing the mode button, press and hold
it until the indicator flashes red. The indicator light will go out and might look like the watch it not
doing anything, however, it is now recording sound.
You can check whether it is still recording audio by quickly pressing the mode button and the
indicator light should flash red again.
When you are done recording audio press
and hold
the Power/Control button until you can see the
indicator flashing red
(this should only take 2 or 3 seconds)
. After the indicator has flashed red the
audio recorder is now off.
