IXIA UHD100T32, Getting Started Manual

Page: 25 / 91

If any items are missing or damaged, contact Keysight Support. See Contact Us for contact
information for each Keysight region.
2. Place the unit in the operating location that you have chosen.
You can operate the fixed chassis as a desktop unit or a rack-mounted chassis. For rack mount
instructions, see
Rack mount UHD100T32 .
Rack mount UHD100T32
UHD100T32 is a compact chassis that you can set up as a stand-alone desktop unit or a rack-mounted
chassis. It is a 1U (1 rack unit) device but quite heavy.
We recommend two people to install the device in a rack.
The following sub-sections provide the specifications and instructions for rack mounting the unit:
l
Rack mount size and weight
For complete information about rack mount size and weight, see Hardware Specifications .
l
Rack mount precautions
For complete information about rack mount precautions, see Product Safety Information .
l
Rack mount instructions
For detailed explanation on rack mount instructions, see the following sections.
You can rack mount UHD100T32 by performing the following steps:
l
Mount the chassis
l
Ground the chassis
l
Connect to the power supply
l
Verify basic chassis operation
l
Connect network cables
Mount the chassis
To mount the chassis, do the following:
1. Attach each of the front-post and rear-post brackets to the device by using four of the included
bracket screws.
2. Use an additional two screws to secure each of the rear-post brackets at the mid-point on the sides
of the device.
3. Use the screws and cage nuts supplied with the rack to secure the device in the rack.
4. Lock the position of the rear-post bracket ears by using the position-locking screws that are
included.
You can also adjust the rear-post bracket ears to fit different rack depths from 56 cm to 85 cm.
The following image illustrates the steps:
Chapter 4 How do I...
913-2626-01 – 10 –