IXIA IxWLAN, User Manual

Page: 110 / 150

The Web-Based User Interface
Configuration Side Bar
4-74 IxWLAN User Guide, Release 6.20
4
Pre-Shared Key (64 hex digits): Defines a Pre-Shared Key (64 ASCII-hex char-
acters) for all virtual stations in this group. If using a Pre-Shared Key, it is not
necessary to specify the passphrase.
Passphrase (up to 63 characters): Defines a passphrase of up to 63 ASCII charac-
ters. If a passphrase is defined, it is not necessary to specify the Pre-Shared Key.
The passphrase is used to generate the Pre-Shared Key.
• Click OK to save this information to IxWLAN.
• Click Cancel to close this dialog without saving this security configuration.
Configuration->Security EAP Tab
If WPA or RSN is selected in the Authentication field, the Security EAP tab
allows you to define an EAP Algorithm, user ID and certificate file, and PEAP/
TTLS parameters, as shown in
Figure 4-89 .
Figure 4-89. Security EAP Tab
Inner Algorithm : Select MS-CHAPv2 or EAP-MS-CHAPv2 from the list box.
MS-CHAPv2 is normally used for TTLS, while EAP-MS-CHAPv2 is normally
used for PEAP.
User ID : Sets the user ID that is used as default for all virtual stations when a
new group is created. It can be up to 64 characters in the range A…Z, a…z, 0…9,
or other legal characters: period (.), dash (-), at-sign (@).
Client Certfile : Sets the certificate file that is used as the default for all virtual
stations when a new group is created.
Select… : Click the Select… button to open the Available Certificates dialog and
select the certificate file to use. See Available Certificates on page 4-36.