14
Assign IP in Web UI
If you want to change the IP address through the Web UI, do the following:
1. Open a browser on a PC connected to the iBypass switch and on the same
subnet, and enter the default IP address in the URL, https://10.60.4.180.
2. At the iBypass log in banner page, enter Username admin and Password
admin. The Home page displays. See Figure 7.
3. Click on the Admin tab. Under the Users List, enter a new password for the
admin user. Re-enter the new password and click Update. Remember the new
password. You must use the new password for subsequent log ins.
4. Click on the Configuration tab. The Configuration page displays. See Figure 8.
5. The IP Version field displays IPv4. Do not use IPv6 at this time.
6. In the DHCP field, select Static or Dhcp.
7. If you select Static, enter the IP address, netmask, and default gateway.
8. If you select Dhcp, your DHCP server will assign an IP address to the iBypass
switch.
9. Click the Apply button for the changes to take effect.
10. After the iBypass has rebooted, enter the new IP address at the URL. The
iBypass home page displays.
