IXIA BreakingPoint 20, Installation Manual

Page: 18 / 65

BreakingPoint 20 Installation Guide 7 BreakingPoint Systems Inc. © 2005-2015
2 Getting Started
This section covers:
• Getting Started Overview
• Task 1: Installing the BreakingPoint Device
• Task 2: Configuring the BreakingPoint Device
• Task 3: Establishing a BreakingPoint Session
• Task 4: Accessing the BreakingPoint Control Center
• Task 5:Creating a User Account
• Task 6: Setting the Time and Date
• Task 7: Creating a Device Under Test Profile
• Task 8: Creating a Network Neighborhood
• Task 9: Making Port Reservations
• Task 10: Creating a Test
Getting Started Overview
Welcome to the Getting Started section of the BreakingPoint 20 Installation Guide. This section
will provide an overview of the tasks you must complete in order to install and configure the
BreakingPoint device, as well as explain how to set up your test environment within the
BreakingPoint Control Center.
Table 2-1 on page 7
lists the Getting Started tasks.
Table 2-1: Getting Started Tasks
Task Description
Task 1 Installing the BreakingPoint Device
Task 2 Configuring the BreakingPoint Device
Task 3 Establishing a BreakingPoint Session
Task 4 Accessing the BreakingPoint Control Center
Task 5 Creating user accounts
Task 6 Setting the time and date
Task 7 Creating a DUT Profile
Task 8 Creating a Network Neighborhood
Task 9 Making Port Reservations
Task 10 Creating a test