3.
Pairing
Register pairing
- The first time you turn on the power, the red and blue LEDs continue to flash and automatically enter pairing mode.
- After entering, if there is no connection for two minutes, enter standby.
- In the Bluetooth menu of your phone or target device, turn on Bluetooth, run a search, and locate and
connect PWE-200 in the list of devices searched.
-"Connected" when connected normallyThe LED turns off with an announcement.
- Once registration is completed, it will automatically connect in the future.
- 1 to 3 seconds after registration is completed, a request is made to register the opposite earbird.
- When a pairing request occurs, please click "OK" or "Accept" to register.
- If both PWE-200-L and PWE-200-R are registered on the Bluetooth list, any subsequent removal of the earbuds
from the charging case will automatically connect.
※If the red and blue LEDs do not keep flashing when the power is on, please follow the procedure below.
- With power on, touch the earbird on the side you want to register for 6 seconds.
- The red and blue LEDs continue to flash with the sound of "Start pairing".
- After entering, if there is no connection for two minutes, enter standby.
- On the Bluetooth menu of the device you want to pair, turn on Bluetooth and connect PWE-200 from the list
of discovered devices.
- When connected normally, the LED will turn off with a "Connected" sound.
- Once registration is completed, after automatically connected.
- After 1 to 3 seconds of registration, you will be asked to register the opposite earbird, so press "OK" or "Accept"
to register.
- Once PWE-200-L and PWE-200-R are all registered on the Bluetooth list, any subsequent removal of the earbird
from the cradle will automatically connect.
