iWorX VAV Series, Installation Manual

Page: 3 / 16

iWorx® VAV Series
502-011, Effective: March 16, 2011 3
© 2011 Taco Electronic Solutions, Inc.
Taco Electronic Solutions, Inc. will not be responsible for any product or part not installed or operated in conformity with
the Document and instructions or which has been subject to accident, disaster, neglect, misuse, misapplication, inade-
quate operating environment, repair, attempted repair, modification or alteration, or other abuse. For further informa-
tion, please refer to the last page of this Document for the company’s Limited Warranty Statement, which is also issued
with the product or available at www.taco-hvac.com.
APPLICABLE DOCUMENTATION
See the table below for additional documentation that may be applicable to this controller.
Description Audience Purpose
iWorx® LCI2 Application Guide , Doc-
ument No. 505-002
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using
the iWorx® Local Control Interface.
iWorx® VAV Series Application
Guide
, Document No. 505-011
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using
the iWorx® VAV Series controllers.
iWorx® VPU2 Application Guide ,
Document No. 505-010
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using
the iWorx® VPU controller.
iWorx® MPU2 Application Guide ,
Document No. 505-009
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for setting up and using
the iWorx® MPU controller.
iWorx® TS100 Series Installation
Guide
, Document No. 502-015
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for installing and using the
iWorx® TS100 Series sensors.
iWorx® TS300 Series Installation
Guide
, Document No. 502-017
– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user Provides instructions for installing and using the
iWorx® TS300 Series sensors.
http://iWorxWizard.taco-hvac.com – Application Engineers
– Wholesalers
– Contractors An on-line configuration and submittal package
generator based on user input. Automatically
generates bill of materials, sequence of opera-
tions, flow diagrams, wiring diagrams, points
and specifications.
Additional
Documentation LonWorks FTT-10A Free Topology Transceiver User’s Guide, published by Echelon Corpo-
ration. It provides specifications and user instructions for the FTT-10A Free Topology Trans-
ceiver. See also: www.echelon.com/support/documentation/manuals/transceivers.