P a g e
4 | 9
2. Each smart sensor is designed with two optional power relays [see section
2.13 for details] which can be used to power control other electronic products.
These relays are activated whenever the smart sensor defined upper limit is
exceeded.
3. Each smart sensor (other than the PM2.5 model) also has an option to
provide a 4-20mA varying electric power source to a single target.
4. For the advanced smart sensor model, each smart sensor can also capture
and perform relay of 315/433Mhz control signals.
2. Configuring iWiscloud Smart Sensor
In this section, we would explain on the configuration options, following settings ->
configuration in chronological order.
2.1.
Main display screen
1. The top value indicates the reading of the smart sensor detection attribute
(depending on smart sensor model)
2. The next row with a loud speaker icon indicates the detected sound level.
The higher the sound level detected, the more
“
_
”
would appear.
3. The last row indicates the luminosity level detected.
4. If the smart sensors are paired with iWiscloud control centre, the sensor
exact readings can be obtained from the cloud as seen in below diagram.
