IWILL P4DA, User Manual, Page: 69 / 96

5: System Configuration
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 5•15
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Integrated Peripherals
Main Section Functions
Configures the peripheral features integrated onto the
motherboard.
Default & Autodetected Settings
Everything on this screen is an optimized default. The
IDE transfer mode settings are autodetected. The system
will work with these defaults. The port settings are stan-
dard PC settings.
Setting Options & Constraints
You can disable onboard devices and change port set-
tings. If you install an IR port module, you have to set the
“UART Mode Select” line to the appropriate IR setting.
You can alter the default port settings if need be, but the
default port addresses will work should not be changed
without reason. You can set a Keyboard Power On pass-
word and Hot Key assignment from this screen.
CMOS Setup Utility – Integrated Peripherals