49
4.2 How to make driver diskette
This bootable Power Installer CD also allows you to boot up your system, even when the OS is not
installed.
When the system boots up, it will perform “Iwill Diskette Creator” automatically for making the
driver diskettes you need.
Note: At least one CD-ROM drive and one 1.44M floppy drive are necessary to make “Iwill
Diskette Creator” work properly.
Follow the instructions below to make your own device driver diskettes if you have a CD-ROM
with IDE interface. Should you have SCSI CD-ROM installed, please skip 1 – 6 and start the
following procedure from Step 7.
1.
Press “
Del
” key to enter “
CMOS Setup Utility
” menu while boot up the system.
2.
Use arrow keys to select “
BIOS FEATURES SETUP
” on the menu, then press
“
Enter
.”
3.
Select “
Boot Sequence
” and change the default setting from A,C, SCSI to “
CD-
ROM,C,A
” with page up/page down key.
4.
Press “
Esc
” key to go back to CMOS SETUP Utility menu.
5.
Press “
F10
” to select “Save and Exit Setup”
6.
Press “
Y
” then “Enter” to complete. Now you are able to boot up the system
from CD-ROM.
7.
Insert the Power Installer CD into the CD-ROM drive and restart the computer.
8.
Iwill Diskette Creator is now executed automatically for making your own driver
diskettes.
9.
Make the desired driver diskettes according to the instructions prompted on screen.
4.3 View Detailed Manual
This Power Installer includes all the User's Manuals with detailed nformation for each
motherboard.
4.3.1 How to view the user's manual
1. Insert Power Installer into your CD-ROM drive.
2. Click on
View Manual
, the following selections will pop out for your choice.
IWILL Product Manual
Pentium III Xeon Series:
1. DGL200
Pentium III Series:
1. DBL100
2. DBS100
3. BS100
4. BD100
5. DBD100
Pentium II Series:
1. LE370
2. DPIIlS2
3. PIILS
4. PIILD
5. PIILE
