manualshive.com logo in svg

IWILL kv200, Manual

Share
Download
IWILL kv200 Manual Download Page 125

125

Chapter 6

On board Audio

 6.3.2About Audio Rack

The Audio Rack is consisted of several major components.

6.3.2.1 Control Center

Controls the display of the PCI  Audio Rack’s
components.

6.3.2.2 MIDI Player

Plays MIDI music files, and allows you to create your
personal  song playlists, and play the song files.

6.3.2.3 MP3/Wave Player

Records and plays digital audio (mp3/wave) files.
Allows you to create wave file playlists, and playback
the wave files.

6.3.2.4 CD Player

Plays standard audio CDs.  Allows you to create your
favorite song playlists.

7.3.2.5 System Mixer

Controls the volume level of your audio inputs and
outputs

6.3.3 Showing or Hiding Audio Rack Components

To remove or add a component from the display, click on the
component’s button on the Control Center’s Button Bar or
toggle it off.

6.3.4 MIDI Player, Wave Player, and CD Player

CD Player(above, similar to MP3/Wave Player and MIDI Player)

Summary of Contents for kv200





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands