- 9 -
Processor installation.
a. Be sure the first pin position in the right direction and install the processor(C), see figure down below.
b. There is a handle at the side of socket603 (F), and it should be fully pulled up or the processor(C) can not
be installed on it. After that, pull down the handle of socket603 (F).
c. If only one processor will be installed on motherboard, it should be installed in the socket P0 and leave the
socket P1 with nothing.
Screws:
a. Support the motherboard (G) on the chassis (I) after nuts (J) and screws (H) have screwed on the chassis
(I) first, see the figure down below.
b. Screw the retainer (E) on the chassis (I) thru motherboard (G), so that the retainer (E) will be fixed on the
motherboard (G).
Socket P1
Socket P0