Chapter 5
On board Audio
54
We recommend that you have Microsoft Windows NT intalled, and
remove any exsisting sound drivers from your current system,
before you install this PCI sound device driver.
1. Click “Start” , move the highlig ht bar to “Setting”, and select the
“Control Panel”.
2. Double-click “Multimedia.”
3. Select “Devices”, and press “Add”
4. Select “Unlisted or Updated Driver” in List of Drivers.”
5. Specify the drive path where NT drivers are in
(such as D:\NT 40\DRV).
6. Select “C-Media CM8738,” and press “OK”.
7. Select proper I/O value.
8. Press “OK.”
9. Restart the system when being asked.
10. Now, you have already installed the PCI Audio Adapter under
Microsoft Windows NT 4.0 successfully. If you want to install
the Windows applications, continue the following steps.
11. Click “Start”
12. Select “Run”
13. Key in drive path where the Windows NT application
installatio n program are in;
for example, “D:\NT 40\APP\SET UP.EXE
14. Click “OK” to start the installation procedure, and follow the on-
screen instructions to comp lete the installation. When all of
application software has been installed , shut down the
Windows NT system, then reboot your system.
Windows NT4.0 Installation
