iWeld FANTOM 4.6, User Manual

Page: 38 / 46

EN
W
′ ′
′ ′ Y
′ ′ Z
′ ′
T ′ ′ Z
Y
X
( W ) Top head band To move the Head Band in the direction of arrow (as picture) to
adjust the depth of headband. According to user’s head shape adjust to a suitable
position.
( T,Z ) Distance of Harness from filter lens To adjust the distance from the welder’s eyes
to filter lens (left-right Symmetrical adjustment).
( Y ) Back of headband To adjust the size of headband (loose or tighten).
This model is designed & equipped with a special turnover ( X ) headband mechanism.
When welder turns over the helmet to welder’s head top, the headband mechanism
makes helmet’s gravity center to be more lower, and be coincided with the center
of welder’s head. The design of welding helmet greatly lowers the fatigue of welder’s
head ( & neck ) and make welder feel more comfortable than before while at work -
ing.
Headband has been set unevenly and there is an uneven distance from the eyes to
the filter’s lens (Reset headband to reduce the difference to filter).
5. Adjusting headgear
The „Low Battery” indicator helps to monitor the function of the basic LCD system.
When the LED is red, then the battery has to be changed. One pc of CR2032 Li bat -
tery is installed into the LCD frame. You can change the battery with bare hands
without any tools.
7 6