06.01.2021
manual
https://www. wc.com/en/manual.IW377714.en.html
11/16
TIME SETTING
Before pulling the crown out to its limit to set the time, you should ensure that the watch still has a few hours’
power reserve. Otherwise, the crown should be pushed into position 0, the winding position, and the watch should
be wound.
For watches with a date display, there is a middle position for the crown. By pulling the crown out to its limit,
position 1, used for setting the date, will be skipped and the crown will be in position 2.
If the crown is completely pulled out, the movement will be automatically stopped and the time can be set by
turning the crown.
To start the seconds hand, push in the crown to position 0.
By depressing the crown in position X and turning it to the right at the same time, it is screwed down firmly again
and secured.
READING THE TIME IN THE DARK
FEEDBACK
