Install the driver for Debug Port in Host PC/Laptop using the
below link.
https://ftdichip.com/products/ft232rq/
Connect TypeA end of USB cable to PC and MicroB end of USB
cable to Development platform's Debug USB MicroAB
Connector (J5) as shown below.
Step 8 - Debug Port Setting
Setup the Debug Terminal parameters.
Baud Rate : 115200
Data bits : 8
Parity : None
Stop Bits : 1
Flow Control : None
Quick Start GuideiW
-RainboW
-G28D
iW
-RaniboW
-G28D
iW
-RainboW
-G28D
iW
-RainboW
-G28D
iW-RainboW-G24DiW-RainboW-G24D
10
