REL 1.0
Page 25 of 59
iWave Systems Technologies Pvt. Ltd.
iW-RainboW-G15M Android User Manual
Figure 2: Platform Detection
Click on the Start button, MFG Tool will start programming binaries into boot device and the debug console
will show the debug messages
After successfully programming the Android binaries into boot device, the progress bar will become Green
colour and the status box will be shown “Done”
Figure 3: Binary Programming Succeed
Click “Stop” to finish, and Click “Exit” to terminate the application
After powering OFF the platform, change to internal boot mode
3.1.5
Limitations
MFG tool supports to program the binaries for only one device at a time.
This application does not support USB 3.0 host port.
If MFG tool v2.0 application is executed on Windows7, when it runs in the “updater” phase, a popup
message will be shown to ask whether disk should be formatted. Please ignore it, or click the "Cancel"
button. It will not affect any function.
When the xml file (ucl2.xml) or the configuration file (cfg.ini or UICfg.ini) is modified while the application is
running; the change will not work until the application is restarted.