REL 1.0
Page 30 of 69
iWave Systems Technologies Pvt. Ltd.
iW-RainboW-G15D Linux User Manual
Press 'p' to create primary partition. Give 1 as partition number. Then give first cylinder as ‘7’(Based on the
total cylinders we have to change the size) Because first 7 cylinders is for U-Boot.bin purpose and Last
cylinder as half of displayed size (e.g. below case 1038 is displayed, give approximate half size, 512)
p
Partition number (1-4): 1
First cylinder (1-1038, default 1): 7
Last cylinder, +cylinders or +size{K,M,G} (1-1038, default 1038): 512
Press 'n' to create new partition (going to create second partition).
Command (m for help): n
Command action
e extended
p primary partition (1-4)
Press 'p' to create primary partition. Give 2 as partition number. Just press enter without any arguments for
First and Last cylinder. Because, First & Last cylinder locations will be displayed from end of 1st partition to
end of disk.
p
Partition number (1-4): 2
First cylinder (513-1038, default 513): 513
Last cylinder, +cylinders or +size{K,M,G} (513-1038, default 1038): press ENTER
Assign file system to created partitions. Partition 1 as FAT16 and partition 2 as LINUX.
Command (m for help): t
Partition number (1-4): 1
Hex code (type L to list codes): 6
Changed system type of partition 1 to 6 (FAT16)
Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 83
