REL0.2
Page 42 of 88
Zynq Ult MPSoC SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
2.8.5
Power On/OFF Switch
The Zynq Ult MPSoC SBC has power ON/OFF switch (SW3) to control the Main power Input ON/OFF
functionality. This power ON/OFF switch is physically located at the top of the board as shown below.
Figure 17: Power ON/OFF Switch
2.8.6
Reset Switch
The Zynq Ult MPSoC SBC supports Push button switch (SW2) to reset the Zynq Ult MPSoC CPU. Reset
signal of Zynq Ult MPSoC is directly connected from Reset Push button switch. This Reset Push button switch
(SW2) is physically located at the top of the board as shown below.
Figure 18: Reset Switch
