iW
-RainboW
-G28D
iW
-RainboW
-G28D
Command Prompt(Linux)
11
Step 4 - Test Environment setup
Once power is applied to the Development Platform as explained in the
previous section, boot messages being displayed in the debug terminal of
the PC/Laptop which is connected to the Development platform. Press any
key in terminal immediately to see the command prompt of the Boot loader
or wait until OS boots.
iWave supports below mentioned Operating System Releases for iW-
RainboW-G40D i.MX 8M Plus SMARC Development Platform.
Linux 5.4.70 (or higher)
A n d r o i d 1 1 . 0 . 0 ( o r h i g h e r )
After OS boots, Login prompt being displayed in the debug terminal and
enter password as “root” to get the Linux command prompt as shown
below.
iW-RainboW-G40D
03
iW-RainboW-G40D
10
