Nozzle
In time, the nozzle may wear or be damaged and may need to be replaced.
1. Unscrew the handle.
2. Loosen the needle chucking nut.
3. Gently pull the needle part way back. It doesn’t need to be fully pulled out.
4. Unscrew the needle cap and the nozzle cap.
5. Unscrew the nozzle counter-clockwise with the provided wrench.
6. Screw the new nozzle into the airbrush body with your fingers.
7. Slightly tighten the nozzle with the provided wrench.
• DO NOT OVER TIGHTEN!
8. Screw the needle cap and nozzle cap onto the airbrush body.
9. Push the needle all the way forward until it seats with the new nozzle.
10. Tighten the needle chucking nut.
11. Screw the handle onto the airbrush body.
TIP: Keep a spare nozzle on hand for unforeseen accidents.
Needle
Needles are subject to easy physical damage because of the long tapered, extremely
fine tip. If the needle point becomes severely bent, it must be straightened before
pulling it back through the nozzle. If not, the bent needle might damage the nozzle
as it’s pulled through.
TIP: Keep a spare needle on hand for unforeseen accidents.
Copyright © 2010 Iwata-Medea Inc. All rights reserved. The Iwata-Medea logo, Iwata-Medea®, Iwata Eclipse™, Iwata Revolution™, Iwata Kustom™, Iwata Micron™, Sprint Jet™, Smart Jet™, Power Jet Pro™, Power Jet Lite™, Medea Super Lube ™, Pistol Grip Filter™, and
all products denoted with ® or ™ are registered trademarks or trademarks of Iwata-Medea Inc. • Iwata® and the Iwata logo are registered trademarks of Anest Iwata Japan. For more information visit
www.iwata-medea.com
Rev5 10/14
— w w w . I W A T A
N E O
. c o m —
ANEST IWATA-MEDEA, Inc.
• 1336 N. Mason St., Portland, OR 97217
tel: 503-253-7308 • fax: 503-253-0721 • [email protected]
REPLACEMENT PARTS AND ACCESSORIES
REFER TO MASTER PARTS LIST ON PAGE 4
WARRANTY
All NEO for Iwata airbrushes are
Warranted
against all manufacturing defects of material and manufacture or workmanship for a period of FIVE years from the
date of purchase. This warranty does not cover fluid needles or fluid nozzles since these parts need to be replaced occasionally due to normal wear. Any other part or
material that is or becomes defective so as not to be usable within this period will be repaired or replaced. This warranty does not cover damage caused by negligence
or airbrushes that have been altered or abused in any way. Call or email Iwata-Medea before returning an airbrush for the appropriate procedure for warranty repairs.
5
