15
Always remove the case of your iPod/iPhone before inserting it into the dock.
If you experience any unwanted distortion during iPod/ iPhone playback, it is recommended
that you set the EQ in your iPod/iPhone to the
off
position.
The volume control on your iPod/iPhone will not function while it is docked.
• The unit cannot show any music information of your iPod/ iPhone. Please view the music
information from your iPod/ iPhone display.
• You will need to unlock your iPod touch / iPhone before you can control it from the remote
control (music only).
iPod/iPhone operation
selecting iPod/iPhone mode
Press the
STANDBY/SOURCE
button on the unit or on the remote control repeatedly to
select
iPod
mode.
inserting the iPod/iPhone
1. Insert your iPod/iPhone into the iPod/iPhone dock.
control iPod touch / iPhone (remote control only)
Press the
MENU/MEM./CL. SET
button on the remote control, the iPod will go to the
previous menu. Press the
UP/DOWN
buttons to select the next/previous iPod menu.
Press the
ENTER
button to enter the selected menu. Settings are changed in the same way
once the menu item has been highlighted.
2. Turn the
CONTROL
behind the speaker to adjust the position of
the support until it touches the rear panel of your iPod/ iPhone.
3. If the iPod/iPhone is connected, the unit will start playback after
a few seconds. The iPod/iPhone battery will automatically start to
charge until it is fully charged.
4. Select your desired music and play the connected iPod/iPhone
as usual.
• Press the
PLAY/PAUSE
button to start / pause playback.
• Press the
SKIP
buttons to select the previous or next song.
• Press and hold the
SKIP
buttons on the remote control to fast backward /
forward through a song.
• Press the or button on the unit or on the remote control to adjust the sound
level as desired.
DC IN
AUX IN
FM ANT.
THICKER
SLIMMER
iPHWAV10_IB_final110509.indd 15
09/05/2011 4:45 PM
