16
safety warnings
•
Read all the instructions carefully before using the unit and
keep them for future reference.
•
Retain the manual. If you pass the unit onto a third party
make sure to include this manual.
•
Check that the voltage marked on the rating label matches
your mains voltage.
Damage
•
Please inspect the unit for damage after unpacking.
•
Do not continue to operate the unit if you are in any doubt
about it working normally, or if it is damaged in any way -
switch off, withdraw the mains plug and consult your dealer.
Location of Unit
•
The unit must be placed on a flat stable surface and should
not be subjected to vibrations.
•
Do not place the unit on sloped or unstable surfaces as the
unit may fall off or tip over.
•
The mains socket must be located near the unit and should
be easily accessible.
•
This unit is designed for indoor use only.
Temperature
•
Avoid extreme degrees of temperature, either hot or cold.
Place the unit well away from heat sources such as radiators
or gas/electric fires.
•
Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
•
Never place any type of candle or naked flame on the top of
or near the unit.
iHDDK11_IB_111018.indd 16
10/18/11 12:30 PM
