5
power source
mains power
Before using the unit, connect the
supplied mains adapter to the DC 5V IN
socket at the rear of the unit and then to
the mains socket.
basic operation
powering ON/OFF
1. After connecting the mains adapter to the unit and the mains socket, the display will
turn on and the time will be shown. (You will need to set the time.)
2. The unit will enter
STANDBY
mode.
3. Press the
SOURCE
button to switch the unit between the different modes (AUX, FM,
iPod).
4. Press and hold the
SOURCE
button until the “OFF” show on the display. The unit will
turn to
Standby
mode, and the time will display.
setting the time
The clock can only be set in
STANDBY
mode
1. In standby mode, press and hold the
STORE
button to enter the clock setting mode.
2. When you see the hour digits flashing, press the buttons to select the hour,
then press the
STORE
button to set.
3. The minutes digits will flash next. Press the buttons to select the minutes, then
press the
STORE
button to set the time and return to reviewing the clock.
time auto-synchronization
Each time an iPod / iPhone is docked, the clock will automatically adjust to the time on the
iPod / iPhone.
An iPod / iPhone can only sync time up to the nearest minute; it’s possible to have up to 59
seconds difference between the clock radio and the synced iPod / iPhone.
selecting modes
Press the
SOURCE
button repeatedly to switch between modes (
FM, iPod or AUX
).
FM
AUX
iPod
AUX
ANT
DC IN
Unplug the mains adapter will
erase all FM preset stations and
alarm settings.
iCRIP12_IB_120508_Zell.indd 5
08/05/2012 3:00 PM