iWantit IBTB14 Instruction Manual Download Page 14

Page: 14 / 16

hints and tips

If a problem does occur, it may often be due to

something very minor. The following table contains

various tips.

Problem

Cause / Solution

No Power

• Make sure that the unit is fully

charged or connected with a

power source.

• Make sure that the power switch

on the back of the unit is switched

to ON.

response in

AUX mode

• Ensure that the unit is fully

charged or connected with a

power source.

• Ensure that all the required cables

are securely connected.

• Ensure that the unit is switched on.

• Press the PLAY/PAUSE/TALK

Button to resume sound if the unit

is muted.

• Check the volume level of the unit.

• Check the sound input source.

• While answering a call with the

unit via Bluetooth connection, end

the call to resume playback in AUX

IN mode.

Bluetooth

Can’t

connect

• Ensure that the Bluetooth function

is activated on your Bluetooth

device.

• The unit has a Bluetooth function

that can receive a signal within 10

metres. Keep a distance within 10

metres between the unit and your

Bluetooth device.

• Ensure that another Bluetooth

device is not connected with

the unit. If so, disconnect the

Bluetooth device with the unit.

IBTB_N14_IB_140618.indd 14

18/6/14 4:37 PM

Summary of Contents for IBTB14

















Search results

Summary of Contents for IBTB14

Reviews:

Related manuals for IBTB14

Brands by name

Popular brands

iWantit IBTB14, Instruction Manual

Search results

Summary of Contents for IBTB14

Reviews:

Related manuals for IBTB14

Brands by name

Popular brands