14
7. Now the “TUNER” indicator will flash on the display. Press the
TUNING/SKIP/SEARCH
or
buttons to select the mode (
CD
/
USB
/
SD/MMC
/
iPod
/
AUX
/
TUNER
).
8. Press the
TIMER
button again, the timer “VOL” indicator will flash on the display. Press
the
TUNING/SKIP/SEARCH or
buttons to adjust the volume to the desired
level.
9. After adjusting “TIMER ON” and “TIMER OFF”, press the
TIMER
button to confirm. The
“ “ indicator will show on the display.
10. The unit will be turned on automatically to the selected
CD
/
USB
/
SD CARD
/
iPod
/
AUX
/
TUNER
mode and turn off when the timer reaches the preset time.
To cancel timer, press the
TIMER
button on the remote control until the
TIMER
indicator
turns off.
sleep timer setting
The sleep timer automatically turns the unit off after a certain time.
1. While the unit is on, press the
SLEEP
button and “ ” will show on the display.
2. Press the
SLEEP
button repeatedly to select the desired sleep time as below:
3. After setting a desired sleep time, the sleep indicator will show on the display.
4. The unit will automatically turn off once it counts down the sleep time.
To clear the preset sleep time, keep pressing the
SLEEP
button until the sleep icon
disappear.
preset EQ
This system supports a variety of equalizers and sound effects.
During playback, press the
EQ
button on the remote control to select a desired music
mode. Each time the
EQ
button is pressed, the music mode will change to the next one as
follows:
•
Each enable state will be cleared if buttons are not pressed in 10 seconds.
•
For the FM tuner timer, it will turn on to the last station you tuned into.
•
If the display shows “ERROR” while you set the “TIMER ON” it means both “TIMER ON” and
“TIMER OFF” is the same. In this case, please go to “TIMER OFF” to set the off time first.
i44PODCR10_IB_110810_Zell.indd 14
10/08/2011 6:05 PM