background image

- 2 -

WARNING

  Power off

Be sure to turn off power prior to any inspection/maintenance and 

installation works. Be careful power is not turned on unintentionally 

while working on the dampener. In a noisy or dark place, display a sign 

of "Men Working" near the power supply switch.

  Do not remodel the auto-dampener

Never remodel the auto-dampener. Remodeling may cause serious 

injury or damage due to electrical shock. We are not responsible for 

any accident or damage arise from modification.

  Prohibited installation/storage place

To avoid fire or injury, do not install or store the dampener in:

• Flammable atmosphere.

• Dusty place.

• Corrosive atmosphere.

  Ventilation

Risk of poisoning. Keep your working site ventilation when handling a 

toxic/odoriferous liquid. 

  Wear protective clothing

Be sure to wear protective clothing such as safety goggles, protective 

gloves etc. during maintenance and/or inspection.

 Returns

When the dampener is sent back to IWAKI, drain the liquid out of the 

dampener and clean thoroughly with water to prevent any accidents in 

transportation.

No remodeling

Prohibited

Wear protective 

gear

Power off

Safety instruction

Summary of Contents for PDA-20W























Reviews: